So you've probably gone into a panic wondering what in the world a blue-flashing light on the Eufy Camera means, along with what steps to take in correcting it. While in many cases, it isn't really a sign of a malfunctioning device, the blue flashing light is a sort of status communication between Eufy cameras and the user.

What Does the Blue Light Flash?

Eufy camera flashing blue light usually indicates the camera is either pairing with the Eufy Security app or trying to connect to Wi-Fi. Sometimes this can be after a firmware update, power reset, or disruption in your internet service. It is a normal step in the pairing and connecting procedure; however, if it carries on flashing and never actually goes solid, then there might be something wrong.

Systematic Methods to Resolve Eufy Camera Flashing Blue:

Wi-Fi Connection Check:

Ensure that the Wi-Fi network in your house is running fine. The camera may fail to pair or synchronize in case of an erratic or feeble connection.

Eufy Security Camera Login:

Open the Eufy Security app and log in. The flashing blue light on your camera may be caused by it not connecting properly, wherein you are not logged in or there is an authentication issue. Install the latest version of the program.

Re-Pair the Camera

Try unplugging the device from the app and plugging it back in to re-pair the camera. Pay close attention to the pairing instructions. The expectation here is that the blue light will be flashing as the camera attempts to find Wi-Fi or the base station.

Factory Resetting the Eufy Camera:

In case the problem persists, go for factory reset Eufy camera. Most Eufy cameras are equipped with a small reset button. One must press and hold the button for around ten seconds, or until a red light starts to blink or a voice instruction is heard. The setup procedure can then be repeated after resetting.

Check for Firmware Updates:

Yet, to see whether your camera is running on the latest firmware, check the settings in the Eufy app. Outdated software can cause flashing lights and connection issues.

Conclusion

And when your Eufy camera flashes blue, it normally means that it is trying to reconnect, so it is not necessarily a problem. Try logging into the Eufy Security app and checking your network, and if the blue light stays on for more than a few minutes, then you might have to try a factory reset.

Should you have more questions, do visit our webpage.