It might be really annoying if your Eufy camera not showing events, especially if you depend on it for home security.  From firmware bugs to network issues, numerous scenarios can cause these. This exhaustive guide will help you realize what might be wrong and how to make that camera work for you.

1. Check the motion detection settings:

Your Eufy Camera may not detect or record movement as motion settings may be either disabled or configured incorrectly. Open the Eufy Security app and tap on your camera to change the motion detection sensitivity. Also, ensure that motion detection zones are correctly set up and do not exclude any important locations.

2. Check the Eufy camera login

Sometimes a bad Eufy Camera login is the issue. Especially if you are sharing access with family members, check to see if you are logged into the correct Eufy account. Events might not be displayed because of synchronization problems stemming from switching between accounts or using different login credentials.

3. Power and Connection Issues

Maybe it's not recording events because it has lost the Wi-Fi signal or has a drained battery (in case it's indeed battery-operated). Check the camera status on the app to register that your camera is online. If you find it showing the offline indicator, maybe try restarting your network or moving your camera closer to the signal source.

4. Firmware Updates

The Eufy cameras not displaying events could be the result of old firmware. Open the Eufy Security app to check if an update is available for your device. A new update could fix many bugs in the system.

5. Reset Manufacturer of Eufy Camera

And if everything else again fails, then resort to reset Eufy camera. Hold the Sync button for around 10 seconds until the LED starts flashing or until you hear a beep. Then try to set the camera up again and check if the events start showing up.

Keeping the Eufy system always in working condition requires proper attention to upgrades and app settings.

Visit our page for more information on this.