Don’t worry if you have seen your Laview camera blinking blue light. This problem is common among Laview customers, and although it may appear alarming, the blinking blue light typically signifies a setup or connectivity problem rather than a hardware malfunction. You may save time and stress by knowing what the light indicates and how to solve it.

What Is the Significance of the Blinking Blue Light?

Your Laview camera's flickering blue light usually indicates that it is trying to connect to your Wi-Fi network but hasn't been able to establish a steady connection. It may also show up during a power outage or when pairing. The flickering light may occasionally be a sign that your camera needs a firmware update for the Laview camera in order to operate correctly.

Typical Solutions You Could Try

Verify Your Wi-Fi Connection

Make sure the location of the camera has a good Wi-Fi signal. Disconnections brought on by weak transmissions may cause the blue light to blink continually.

Restart your camera 

To restart your camera, power cycle it by disconnecting it for ten to fifteen seconds and then re-plugging it. This little procedure frequently fixes small connectivity problems.

Update the firmware.

Older software might cause issues. Check for any pending Laview camera firmware upgrades by logging into the Laview app. Access to new features and stability are guaranteed when the firmware is kept up to date.

Fix the camera.

Occasionally, the device becomes out of sync with your mobile app or Laview NVR. Proper functionality may be restored by re-pairing the camera using the app.

Reset the camera or NVR to factory settings.

You might have to do a reset if all else fails. Corrupted settings may be removed and your system can be restarted with a factory reset Laview NVR. Note that doing this will remove all prior setups, so you will have to start again.

Usually, a blinking blue light on a Laview camera indicates a waiting update or a connectivity issue. Start with easy troubleshooting techniques like rebooting the device and verifying the Wi-Fi. Try a firmware upgrade or even a factory reset on your NVR if the problem continues. You may rapidly restore your Laview camera's online functionality and maintain the functionality of your home security system with these adjustments.

For further details visit our website.