A brass bibcock is a commonly used valve for controlling water flow in residential, commercial, and outdoor applications. Proper use and maintenance are essential to ensure its durability, prevent leaks, and maintain smooth operation.

Installation and Alignment

Before using a brass bibcock, ensure it is properly installed. The valve should be aligned correctly with the water pipe and securely tightened to prevent leaks. Use appropriate sealing materials, such as PTFE tape or pipe thread sealant, to create a watertight connection. Improper installation can lead to water leakage and potential damage to surrounding areas.

Operating Pressure and Temperature

Brass bibcocks have specific pressure and temperature limits. It is important to check the manufacturer’s specifications before use. Operating the valve above these limits can cause damage, reduce its service life, or lead to leaks. Always use the bibcock within the recommended water pressure range to ensure reliable performance.

Regular Cleaning and Maintenance

To maintain the efficiency of a brass bibcock, regular cleaning is recommended. Mineral deposits or debris can accumulate inside the valve, affecting its operation. Periodically remove the aerator or internal components and clean them with a mild solution. Lubricate moving parts if necessary to ensure smooth operation and prevent stiffness.

Winter Precautions

In regions with cold climates, it is important to prevent water from freezing inside the bibcock. Drain the valve and disconnect hoses during freezing temperatures to avoid pipe bursts and damage to the valve.

When using a brass bibcock, attention should be paid to proper installation, pressure and temperature limits, regular cleaning, and winter precautions. Following these practices ensures long-lasting, efficient, and leak-free operation.

https://www.gafo.cc/product/brass-ball-valve/
JL-B1190A JL-B1190B BRASS BALL VALVE
Medium temperature:-20C≤t≤110°C
Maximum working pressure : 1Mpa(10bar)
Working medium:water,non-corrosive liquid